News center of 3D Filament Extruder Machine Suppliers | Plastic Foam Board Production Line Sale | PE PP Plastic Granulator Machine China | Plastic Pipe Extrusion Line Price

What Material Is 3D Filament? 2022-06-14

ABS should be printed on a heated build plate. ABS needs a higher nozzle temperature than most other filaments, with manufacturers typically recommending between 220-260 °C.

The Role Of Plastic Shredding For Recycling 2022-06-08

The plastic garbage shredder is used to shred various solid or hollow materials such as plastics, rubber, tires, fibers, paper, wood, iron drums, waste electrical appliances, waste cables, industrial scraps, and domestic waste.

How to Choose Industrial Shredder Machine 2022-05-25

The appearance of the garbage shredder is various, and the appearance design of each manufacturer has its own characteristics, but according to the actual production needs and specific shredding requirements, the internal knife rollers of the garbage shredder are basically divided into four types.

History of Shredding Machines 2022-05-10

Industrial shredders are like shredders on steroids. They are powerful workhorses that devour anything. As a result, it's no wonder that more businesses are opting to buy these machines rather than outsource their shredding.

All About Plastic Shredders: From Applications to Advantages 2022-04-25

These consistent particles are effective to produce the highest quality plastic products. This is also one of the main advantagesof usingthe plastic waste shredder in recycling industries.

What Are The Benefits Of An Industrial Shredder? 2022-04-13

Large feed, heavy toothed knife, high shredding efficiency. The bearing seat adopts the split type, which is easy to disassemble and replace the knife, and is suitable for shredding over-large, thick and difficult-to-break materials.

What Is A Plastic Shredder? 2022-03-21

The speed of the knife roller is medium speed: 90 revolutions per minute, single-knife roller structure, can be used for wood, paper, hard plastic, brittle materials, etc. The crushed particles are smaller and more uniform (approximately: 30mm*40mm*20mm).

What Is The Difference Between A Shredder And A Crusher? 2022-03-11

The principle of shredder to shred materials is mainly to tear, cut and shred various materials by low rotation speed, large torque, and the speed difference between the shafts.

Basics About Plastic Recycling Machine 2022-02-23

Polyethylene terephthalate (PET ) is the most commonly used plastic and probably the easiest plastic to recycle. The plastic is crushed and shredded into small pieces which are then reprocessed to make polyester fiber (mechanical recycling).

Brief Introduction Of Plastic Profile Extrusion Line 2022-02-17

Extrusion is mainly used for the forming of metals, but also for the forming of non-metals such as plastics, rubber, graphite and clay blanks. In the 17th century, the French used a manual screw press to extrude the lead pipe and used it as a water pipe, which was the beginning of cold extrusion.