10 safety precautions for operators of 3D filament extruder machine

Many accidents will inevitably occur during the use of the machine, so we must always pay attention to prevent accidents from happening. Below I will tell you 10 things to note about the safe production of 3D filament extruder machine.

 

1. Personnel who have not undergone job appraisal and operation training cannot independently operate extruder production.

 

2. Those with poor eyesight and slow response cannot work on duty.

 

3. Make the environment around the equipment sanitary before driving, and no items unrelated to production are allowed to be stacked around the equipment. Before production, check whether the safety settings of the 3D filament extruder machine are damaged, and test whether they can work effectively. Check whether the connecting bolts are loose and whether the safety protection devices are firm.

 3D filament extruder machine

4. Check all lubrication parts, remove dirt, and add lubricating oil.

 

5. The heating and constant temperature time of the barrel and mold should be guaranteed, and the production should be started when the material temperature does not meet the process requirements. Before feeding the barrel, check the barrel and hopper, and no foreign matter is allowed; there should be no metal, sand, miscellaneous materials, etc. in the raw materials to prevent damage to the screw.

 

6. After the screw is started, the working sound of each transmission part is normal, and the main motor current is within the allowable rated value, before feeding into the barrel is allowed. When feeding, a small amount of material should be added first.

 

7. When adjusting the mold gap or removing dirt, the operator should wear gloves and not face the barrel and mold to prevent the molten material from spraying out of the mold and scalding the body.

 

8.No maintenance is allowed on the extruder while it is running, and no one is allowed to do any work on the equipment.

 

9.The position of the safety cover and safety alarm device on the equipment is not allowed to be changed at will, and it is not allowed to cause malfunction by man. When water or oil leakage is found, the equipment should be repaired and eliminated in time, and no water or oil is allowed to flow around the machine.

3D filament extruder machine

10.When the operator has to leave the machine due to special affairs, he should find someone familiar with the operation of the equipment to take care of it, otherwise the machine must be shut down.

 

Stop emergency when encountering the following phenomena:

The temperature of the bearing part is too high and the lubricating oil flows out.

The motor emits peculiar smell, smoke or the temperature of the casing is too high.

The lubricating oil temperature in the gearbox is too high or smokes.

The transmission parts emit irregular and abnormal sounds.

Severe vibration occurs when the machine is working.

The screw suddenly stops rotating.

 

I hope that my introduction on the safety precautions of 3D filament extruder machines can help you. If you are interested in 3D filament extruder machine, you can contact us, and we will do our best to serve you.

Share This Post

Contact Now

How would you like to be contacted?
* We respect your privacy. When you submit your contact information, we agree to only contact you in accordance with our Privacy Policy.